Valois Tahti 3D printed saddle, three-quarter view showing the lattice top structure
Valois Tahti 3D printed saddle from the side, showing the lattice and rails
Valois Tahti 3D printed saddle from underneath, showing the shell and rail mounts

Valois Tahti 3D Sillín

€149,00

Sillín de carretera de punta corta con acolchado de rejilla impreso en 3D, carcasa de carbono y raíles de CR-MO. La parte superior impresa regula el apoyo y el alivio de presión a lo largo del sillín, y la estructura abierta deja pasar el aire.

El sillín Valois Tahti 3D sustituye la espuma por una rejilla de elastómero impresa. La rejilla es más firme donde necesitas apoyo y más blanda donde necesitas alivio, y no se aplasta ni absorbe agua como la espuma. Un canal central alivia la presión sobre los tejidos blandos y aumenta la ventilación.

La carcasa de carbono mantiene el sillín en 260 gramos y rígido bajo carga. La forma de punta corta se adapta a una posición adelantada y agresiva y a una pelvis rotada. Está disponible en dos anchos para ajustarse a la distancia entre tus isquiones.

Resumen
Ancho
Ancho: 145mm
¡Disponible! Listo para enviar
Descripción

3D-printed padding instead of foam

The top is a printed lattice rather than moulded foam. The structure is denser where the saddle carries load and more open where it needs to give, so support and relief are built into the pad rather than added with layers.

What this gives you:

  • Pressure relief tuned across the saddle, not one uniform foam
  • Airflow through the open lattice
  • A pad that does not compress flat or soak up water over time

Carbon shell and rails, 180 grams

The shell and rails are carbon. That holds the weight to 180 grams and keeps the platform stiff, so power goes into the pedals rather than into a flexing saddle.

What this gives you:

  • A light saddle that holds its shape under load
  • A stiff base for a performance position
  • Carbon rails that suit a clamp rated for them, torqued to spec

Short nose with a central cutout

The short-nose shape puts less saddle in front of you, which suits a rotated pelvis and a low position. The central cutout relieves pressure on the soft tissue, and the two widths let you fit the saddle to your sit bones.

What this gives you:

  • A shape built for an aggressive road position
  • Pressure relief down the centre
  • A width to match how far apart your sit bones sit
Detalles

Technical specifications

  • Product: Valois Tahti 3D Saddle
  • Padding: 3D-printed elastomer lattice
  • Shell: carbon
  • Rails: Cr-Mo
  • Weight: 180 g
  • Length: 245 mm
  • Widths: 145mm
  • Cutout: central, for pressure relief and airflow
  • Colour: black