Valois Tahti 3D-printet carbonsadel | IKUISTA
Valois Tahti 3D printed saddle, three-quarter view showing the lattice top structure
Valois Tahti 3D printed saddle from the side, showing the lattice and rails
Valois Tahti 3D printed saddle from underneath, showing the shell and rail mounts

Valois Tahti 3D sadel

€149,00

Landevejssadel med kort næse, 3D-printet gitterpolstring, carbonskal og CR-MO-skinner. Den printede overflade afstemmer støtte og trykaflastning over sadlen, og den åbne struktur lader luften passere.

Valois Tahti 3D-sadlen erstatter skum med et printet elastomergitter. Gitteret er fastere, hvor du har brug for støtte, og blødere, hvor du har brug for aflastning, og det presser sig ikke sammen og suger ikke vand til sig, som skum gør. En central udskæring tager trykket af bløddelene og giver mere luft.

Skallen er af carbon, hvilket holder sadlen på 260 gram og stiv under belastning. Den korte næse passer til en fremadlænet, aggressiv position og et tippet bækken. Den fås i to bredder, så du kan matche dine siddeknogler.

Overblik
Bredde
Bredde: 145mm
På lager, klar til afsendelse
Beskrivelse

3D-printed padding instead of foam

The top is a printed lattice rather than moulded foam. The structure is denser where the saddle carries load and more open where it needs to give, so support and relief are built into the pad rather than added with layers.

What this gives you:

  • Pressure relief tuned across the saddle, not one uniform foam
  • Airflow through the open lattice
  • A pad that does not compress flat or soak up water over time

Carbon shell and rails, 180 grams

The shell and rails are carbon. That holds the weight to 180 grams and keeps the platform stiff, so power goes into the pedals rather than into a flexing saddle.

What this gives you:

  • A light saddle that holds its shape under load
  • A stiff base for a performance position
  • Carbon rails that suit a clamp rated for them, torqued to spec

Short nose with a central cutout

The short-nose shape puts less saddle in front of you, which suits a rotated pelvis and a low position. The central cutout relieves pressure on the soft tissue, and the two widths let you fit the saddle to your sit bones.

What this gives you:

  • A shape built for an aggressive road position
  • Pressure relief down the centre
  • A width to match how far apart your sit bones sit
Detaljer

Technical specifications

  • Product: Valois Tahti 3D Saddle
  • Padding: 3D-printed elastomer lattice
  • Shell: carbon
  • Rails: Cr-Mo
  • Weight: 180 g
  • Length: 245 mm
  • Widths: 145mm
  • Cutout: central, for pressure relief and airflow
  • Colour: black

Customers are saying

5.00 ★ (17)
Verified